Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00

Get directions

Brand care

McLaren detailing in Abu Dhabi for the 750S and Artura

McLaren detailing protects exposed carbon, low front ends and Alcantara cabins, and leaves hybrid systems untouched. McLaren owners can book paint protection and cabin care in Mussafah.

Grey McLaren with a large rear wing, rear three-quarter view, under the Arabic wall sign

Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00

Popular services

Which services do McLaren owners tend to book?

Models

Which McLaren models are on UAE roads?

  • 750S
  • 750S Spider
  • Artura
  • Artura Spider
  • 720S

See also: Ferrari detailing, Lamborghini detailing

Why us

Why McLaren owners book with us

  • Since 2016Looking after cars in Mussafah
  • 4,108 m²Inside our Mussafah facility
  • Walk in or bookWalk-ins welcome during opening hours
  • 4.6 on GoogleRead owners' reviews on our Google profile
  • Free pickup and drop off (by driver only, with service contract)
  • Free car wash (with service)
  • Dealership alternative
  • Service contracts
  • OEM parts
  • Up to 35% off on repairs

Know before you book

How should McLaren carbon, cabins and hybrids be treated?

McLaren detailing is the cleaning and protection of carbon-chassis supercars, and you can book it at our Abu Dhabi base in Mussafah. McLaren says it has not built a car without a carbon fibre chassis since 1993.

The 750S sits on the Monocage II carbon tub, and the Artura was the first McLaren on the newer Carbon Lightweight Architecture. Low weight comes with low, wide bodywork that meets road debris early.

How do the 750S, Artura and 720S differ for care?

Each McLaren on UAE roads has its own mix of carbon, wheels and technology, so the care plan follows the model.

  • 750S coupe: carbon headlight surrounds are an option, the bumper vents are carbon and the active rear wing is longer than before. Forged 10-spoke wheels measure 19 inches at the front and 20 at the rear, behind carbon ceramic discs of 390 mm and 380 mm.
  • 750S Spider: it uses the Monocage II-S tub and shares the coupe’s carbon details. As an open car, its roof seals and the cabin collect more dust after a drive.
  • Artura and Artura Spider: hybrid power changes the rules under the skin, so nothing near the high-voltage system is cleaned with water. The Spider launched in the region at an event in Dubai in May 2024.
  • 720S: the older model’s front lift needs around ten seconds, and its paint and carbon have usually spent more summers in the sun.

Where does a McLaren 750S show bare carbon?

On the 750S, bare carbon can appear on the headlight surrounds, the bumper vents and the long active rear wing. Each piece sits under a clear finish that scratches as easily as paint.

Vents and wing edges trap fine dust, so a soft brush clears them before washing. Rubbing dusty carbon with a cloth leaves swirl marks that stand out on the dark weave. Our carbon fiber page covers repairs and replacement parts.

Strong UV adds slow damage. Over several summers, unprotected clear finish on exposed carbon can lose its depth. Film or a coating on those parts keeps the weave looking wet.

Is the McLaren front lift enough to stop chips?

No, the front lift helps on ramps, but it does nothing against stones at speed. On the 750S it raises the nose in about four seconds, against roughly ten on the 720S.

The splitter, lower bumper and leading edge of the bonnet still take the impacts. Clear film across those areas keeps chips off both the paint and the carbon.

Regular motorway driving behind lorries adds chips quickly, and a bare nose can look peppered within months. Film is far easier to replace than carbon or paint.

How is a McLaren cabin cleaned?

A McLaren cabin is cleaned material by material, because Alcantara, Nappa leather and carbon each react differently. The 750S comes with Alcantara as standard, and the TechLux and Performance themes add full or part Nappa leather.

Optional carbon racing seats have a hard shell that can scuff as you climb in and out. An interior detail lifts hand oils from Alcantara with minimal moisture and treats the leather separately.

Heat makes this more urgent in summer. Sweat and sunscreen soak into Alcantara on the wheel and seat bolsters, and the fibres flatten into shiny patches if they are left for months. Carbon trim inside the cabin is wiped with dry microfibre and never sprayed with a glossy dressing.

What changes with the hybrid Artura?

The paint and cabin work stays the same, but detailing never touches the hybrid system. Pressure jets are kept away from the charging flap and seals, and the battery and high-voltage wiring are left alone.

For example, engine bay cleaning on a hybrid is limited to wiping the visible covers by hand. Let the car cool in the shade first, so water does not dry into spots on hot panels. McLaren backs the Artura battery with a six-year warranty, which is one more reason to leave that system to the maker’s retailers. On the Artura Spider, dust also settles on the seats and dashboard after a drive with the roof open.

Which issues do McLaren owners in Abu Dhabi run into, and what solves each one?

Sand, sun and fast roads cause most of the wear on a McLaren in this climate. The table lists typical problems beside the work that usually deals with them.

Common issue in the UAE What usually fixes it
Chips on the splitter, bumper and bonnet edge Paint protection film over the nose and splitter
Dust that sticks to paint and carbon A ceramic coating so a rinse lifts it more easily
Shiny, flattened Alcantara A gentle interior detail with minimal moisture
Kerbed 19-inch or 20-inch forged wheels Refinishing through rim repair
Scuffed or faded carbon trim Repair or new parts through our carbon fiber service
A hot cabin after parking outside Window tinting kept within the legal 50%

Many owners pair front film with a coating across the remaining panels, so sand and dust wash away more easily. If the car sits unused for weeks in summer, book a gentle hand wash rather than wiping the dust layer off at home.

Does the front lift protect a McLaren splitter from chips?

No. It helps with ramps and speed bumps, but stones on the motorway still hit the splitter, so film is still worth fitting.

Can an Artura be washed with a pressure washer?

Yes, from a safe distance and never aimed straight at the charging flap or seals. The hybrid system itself is not part of detailing.

How is a carbon racing seat shell kept clean?

The padded parts are cleaned to suit their Alcantara or leather. The carbon shell is wiped with a soft cloth, since its clear finish scratches like paint.

Should a McLaren be washed in direct sun?

No. Hot panels dry soap and water into spots before you can rinse, so wash early, late or in the shade.

Do forged McLaren wheels need a special cleaner?

A pH-neutral cleaner is the safe choice, because acid products can stain the finish. The 750S runs staggered 19-inch front and 20-inch rear forged wheels.

CallWhatsApp