
From AED 400
Brand care
Brabus detailing looks after exposed carbon, 24-inch forged wheels and hand-quilted Masterpiece leather. Our Mussafah team cares for Brabus builds based on the G-Class and the Cullinan.

Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00
Popular services

From AED 400


From AED 650
Models
See also: Mercedes-Benz detailing, Rolls-Royce detailing
Why us
Know before you book
Brabus detailing means caring for cars rebuilt by the German tuner, from widebody carbon to quilted leather, at our site in Mussafah, Abu Dhabi. Many Brabus builds start life as a Mercedes-AMG G 63, and some are based on the Rolls-Royce Cullinan.
The base car’s own care rules still apply, and our Mercedes detailing page covers those. This page deals with what Brabus adds: exposed carbon, very large forged wheels, painted trim and hand-finished cabins.
Each Brabus build adds a different set of parts, so the detail is planned around them.
High-gloss Brabus carbon is cared for like fine paint, because a sealed clear coat covers the weave. On the 800 Cabrio, Brabus lists high-gloss carbon for the front fascia inserts, grille frame, Powerdome, mirror caps and tailgate attachment.
That clear coat scratches easily when dusty carbon is wiped dry. It also loses depth under years of strong UV, so a coating or clear film on the most exposed parts is worth considering.
On the BRABUS 700, the exposed carbon is matched to the Cascade Gray paint, so any repair must suit both. The fender flares sit right behind the front wheels. For example, a run along a gravel road can pepper their leading edges with stone marks within a single trip.
Very large forged wheels with low-profile tyres leave little rubber between the rim and the kerb. The 800 Cabrio rolls on 24-inch Monoblock ZM Platinum Edition wheels, forged and polished in black. They are 10 inches wide at the front and 12 at the rear.
The BRABUS 700 uses 24-inch Monoblock M Platinum Edition wheels, forged, CNC-machined and painted to match the body. Polished and painted faces both need an acid-free wheel cleaner and a soft brush.
The XL 800 is different again, on 22-inch forged and CNC-machined wheels built for rough ground. Sand packs into the spokes and around the hubs, so a thorough rinse comes first.
A Masterpiece interior is cleaned slowly, panel by panel, because the leather is hand-quilted and padded. Brabus uses Shell quilting with perforated seat centres in the 800 Cabrio, and Double Cube quilting in the XL 800.
Quilting seams and perforations trap fine sand, so a soft brush and a gentle vacuum come before any cleaner. The BRABUS 700 adds Shell quilting with embossed B logos and a leather headliner, which is cleaned with the same light touch as the seats. Moisture is kept to a minimum, since water soaks into the padding behind each stitched panel.
Carbon also appears inside. The 800 Cabrio uses exposed-structure carbon for the pedal pads and entrance panels. Shoes scuff these parts, and a barely damp microfibre lifts the marks without scratching.
Heat, sand and sun each hit Brabus materials harder than standard trim. Dark leather and carbon surfaces get very hot in summer parking, which dries the hide and softens dirt into the grain. The lit fenders on the 800 Cabrio sit close to the wheels, so their lenses gather road film that a soft, wet cloth clears.
The soft top on the 800 Cabrio collects dust in its folds when it opens. Brushing it out and keeping the fabric dry before folding stops grime and damp from staying trapped in the roof.
Off-road builds like the XL 800 come back with sand in the axles, winch and arches. Salt from beach driving adds a corrosion risk, so a careful underbody rinse matters after every trip.
Most owners ask for chip protection on the widebody, wheel care and a careful cabin clean. The table lists typical Brabus problems in this climate beside the service that usually solves each one.
| Common issue in the UAE | What usually fixes it |
|---|---|
| Stone marks on carbon fender flares and fascia | Clear paint protection film on the leading edges |
| Kerbed 24-inch forged wheels | Rim repair to refinish the face |
| Sand in quilted leather and perforations | A slow, careful interior detail |
| Dust clinging to gloss carbon and paint | A ceramic coating for easier rinsing |
| Cracked or faded carbon parts | Repair or replacement through our carbon fiber service |
| Worn bolsters on older quilted seats | Retrimming through car upholstery |
Because the former chrome and plastic trim is painted on these builds, those surfaces never meet metal polish. A pH-neutral shampoo is safe for paint, carbon and trim alike.
No. Brabus paints the chrome and plastic parts, so they are cleaned like paint. Metal polish would cut through that finish.
Keep the jet well back from the light units and their seals. A soft mitt and a low-pressure rinse are kinder to both the lights and the carbon.
Yes, after every off-road trip. Its portal axles, winch and raised suspension trap sand that a careful low-pressure rinse removes.
Only with great care, if at all. Heavy steam can soak into the padding behind the quilting, so a damp cloth and soft brush are safer.
Many owners fit it on the parts that face the road, such as the front fascia and fender flares. It keeps chips off the gloss clear coat.