
From AED 600
Brand care
Lexus detailing protects thin, multi-layer paint, keeps hand-finished cabins looking new and handles hybrid and electric models safely. We detail every Lexus, from the UX to the LS and LX, at our Mussafah centre.

Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00
Popular services

From AED 600

From AED 1,250 + VAT

Models
See also: Toyota detailing, Infiniti detailing
Why us
Know before you book
Lexus detailing covers the careful correction, protection and cabin care of any Lexus, all handled at our Mussafah centre. Locally, the range takes in the UX, NX, RX and LX SUVs, the ES, IS and LS sedans and the electric RZ.
Lexus is Toyota’s luxury brand, yet its paint and cabins call for a different approach. Toyota models have their own Toyota detailing page, while this one deals with what makes a Lexus special.
Sonic paint is a Lexus process that compresses the colour coat into far thinner layers than usual. Lexus says standard colour paint is usually 13 to 14 microns thick, while its sonic shades bring that down to around four microns.
Certain sonic colours use five ultra-thin layers with compressed pigments. The first two are protective base coats against rust and wear, and the colour effect comes from the layers above them.
The LS took this further with Lunar Silver, where the colour layer is pressed down to just one or two microns. That lines up the aluminium flakes so tightly that the body looks almost like a mirror.
Polishing works on the clear coat above the colour, and once that is cut through, nothing can be polished back. On a sonic colour there is very little pigment underneath to spare, so the margin for error is small.
That is why every correction starts with a paint depth reading and a test patch. We pick the gentlest combination that clears the defect, and deep scratches are left for repair rather than chased.
Some models also offer scratch-resistant paint. Lexus says its flexible top coat can restore itself after light damage, such as a ring scratch. So a mark is inspected again before polishing, because it may already be fading.
A good match depends on measuring the undamaged paint, not on a colour code alone. Lexus says its certified collision centres often use a spectrophotometer, a camera that reads the paint effect on undamaged panels, to match a new part.
Layered colours make this harder, because the flakes and tints have to sit the same way as on the factory paint. A small error shows as a panel that looks lighter or darker from certain angles.
If your Lexus needs bodywork, our car painting page explains how panel repairs and blending work. For a minor scuff, a careful polish is often enough and avoids paint altogether.
Care differs between models in the drivetrain, the cabin materials and the way each car is used.
Hybrid and electric models are washed and detailed just like petrol cars. Under the bonnet, orange high-voltage cables are simply left alone.
Hand-finished trims are cleaned gently, by hand, and never with all-purpose sprays. The LS has used Kiriko cut glass and hand-pleated door trims, and later Nishijin woven fabric and Haku metal leaf.
Haku is metal hammered into a foil just a few thousandths of a millimetre thick, then applied by hand. It is wiped with a soft, dry cloth only, because any abrasive would mark it. Pleated fabric is brushed along the folds, never soaked.
For leather, Lexus UAE advises vacuuming first, then a leather cleaner with a microfibre cloth, then a conditioner worked into the grain. In Abu Dhabi heat that conditioner matters more, because sun dries leather and leads to cracks. A cabin sunshade and good window tinting slow the drying. Light-coloured leather also shows dye from new jeans, which is easier to lift when it is fresh.
Most Lexus visits deal with sun-dulled clear coat, swirl marks and chips, plus cabins that need a careful refresh. Strong sun, motorway sand and humid mornings drive most of these problems.
| Common issue in the UAE | What usually fixes it |
|---|---|
| Swirls on dark or sonic colours | A low-cut machine polish after a paint depth check |
| A clear coat dulled by years of sun | Gentle correction, then a ceramic coating |
| Stone chips on the bonnet and front bumper | Paint protection film on the nose and mirror backs |
| A scraped or dented panel | Panel painting with careful colour matching |
| Dry, creased leather on the driver’s seat | An interior detail finished with conditioner |
| Water spots after humid mornings | A decontamination wash, then a protective layer |
For example, a five-year-old RX that has always parked outside often needs correction before any coating. A new LX usually starts with film at the front and a ceramic layer everywhere else.
Yes. Detailing deals with the paint, glass, wheels and cabin, and it stays clear of the high-voltage parts.
On models with this paint, Lexus says a light mark can recover over time. Deeper scratches still need polishing.
Rarely well. Sonic colours rely on very thin layered coats, so a pen leaves a visible blob. A pen suits sealing a chip, not hiding it.
With a soft microfibre cloth, dry or lightly misted with a mild glass cleaner. Spray onto the cloth, never onto the trim.
Lexus UAE warns that smoke soaks into leather and is very difficult to remove. A deep clean helps, but the smell can linger.
Many owners choose it for the bonnet, bumper and mirrors. Keeping the original paint is far simpler than matching a repair later.