
From AED 400
Brand care
Aston Martin detailing looks after carbon body panels, satin Q paint and open-pore wood with the right method for each. We care for Aston Martin GTs and SUVs in Mussafah.

Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00
Popular services

From AED 400


From AED 650
Models
See also: Bentley detailing, Jaguar detailing
Why us
Know before you book
Aston Martin detailing is the careful cleaning and protection of these British sports cars and SUVs, and our Abu Dhabi team handles it in Mussafah. The range we see runs from the Vantage and DB12 to the Vanquish and the DBX707.
Each car can leave the factory with very different finishes. Two DB12s parked side by side may have gloss or satin paint, black or carbon trim, and wood or carbon inside.
Each Aston Martin family brings its own mix of materials, so the checklist changes from car to car.
The current Vanquish has a full carbon fibre body, including the inset bonnet, door outers and bodysides. A hard knock can crack a carbon panel rather than dent it, so preventing damage matters more than usual.
Stone chips along the front edge of the bonnet are a typical problem on fast roads. Clear film over the front panels keeps the carbon and its paint intact.
The optional carbon packs for the lower body and roof come in gloss or satin 2x2 twill. Gloss carbon can be lightly polished like paint, while satin carbon is only ever cleaned.
Satin finishes are washed by hand and never polished, waxed or glazed, because those products add shine. Aston Martin offers Q Satin paint palettes, and satin 2x2 twill carbon fibre for some exterior and interior parts.
For example, a gloss spray sealant wiped over satin carbon leaves streaks that catch the light. A satin-safe shampoo and a soft drying towel keep the finish even.
Bird droppings need fast action on satin paint. In the summer heat they etch the surface within days, and the mark cannot be polished out without leaving a shiny patch.
Aston Martin cabins mix semi-aniline leather, Alcantara and, on the DB12, optional open-pore ash or walnut. Semi-aniline leather has only a light protective finish, so it shows marks sooner than coated hides.
That leather is cleaned with a gentle product and then conditioned against the dry heat. Open-pore ash and walnut keep their grain open under a very thin finish, so silicone dressings never go near them. A dry, soft cloth is enough for dust.
The DB12 also lists hand-stitched leather from the Scottish Leather Group. Pale hides in particular pick up colour from dark jeans, and early cleaning stops that dye from setting. Above them, the black Alcantara headlining is brushed lightly and never soaked.
Heat dries leather, sand scratches satin finishes and strong sun warms dark cabins quickly. Each of these hits the specific materials Aston Martin uses.
Fine sand settles on the gloss carbon lower pack of a DBX after a desert drive. Rinse it off with plenty of water before any mitt touches the car, because dry grit drags across the clear coat.
A panoramic glass sunroof lets a lot of sun into the DBX707 cabin. Legal window film on the side and rear glass helps, and a sunshade protects the semi-aniline seats when you park outside.
Humid summer nights add another layer. Morning dew mixes with dust into a fine paste. A quick wipe in the car park then does more harm than good on satin paint and carbon, so rinse first.
Most owners ask for front-end film, wheel care and a cabin refresh. Paint protection film is fitted over painted carbon panels in the same way as over metal ones.
| Common issue in the UAE | What usually fixes it |
|---|---|
| Stone chips on a carbon or aluminium nose | Paint protection film in gloss or satin to match the paint |
| Kerbed 21-inch or 22-inch forged wheels | Rim repair and wheel protection |
| Dry, marked semi-aniline seats | A gentle interior detail with conditioning |
| Dust that clings to gloss paint | A ceramic coating for easier rinsing |
| Faded or scuffed exposed carbon | Advice and parts through our carbon fiber service |
| Heat through the panoramic roof | Side and rear window tinting within the legal limit |
The DBX707 rolls on 22-inch forged wheels as standard, with 23-inch options, and stops with carbon ceramic brakes. Large forged rims are easy to kerb, and a scraped edge is easier to refinish before corrosion starts under the paint.
A satin or matte film keeps the low sheen, while gloss film would make the panel shiny. Mixing the two finishes on one car looks uneven.
Yes. They are rinsed with a gentle, pH-neutral wheel cleaner, and harsh acids and stiff brushes are kept away from the discs and calipers.
Aston Martin lists black, yellow, red, silver, Aston Martin Racing Green and bronze. Bright calipers show brake dust, so they need regular gentle cleaning.
Yes, with a soft brush and a barely damp microfibre cloth. Spraying cleaner straight onto it can leave water marks and weaken the glue behind it.
It marks more easily than coated leather, because its surface finish is thinner. Wiping spills quickly and cleaning it gently on a regular basis keeps it fresh.