
From AED 400
Brand care
Lamborghini detailing looks after special paint effects, carbon surfaces and Alcantara cabins with products suited to each. We detail Lamborghini cars at our Mussafah centre.

Mon to Sat 09:00 to 22:00, Sun 09:00 to 19:00
Popular services

From AED 400


From AED 650
Models
Why us
Know before you book
Lamborghini detailing in Abu Dhabi must cope with paint effects that ordinary products can damage, and we handle it in Mussafah. Ad Personam, the brand’s personal order programme, offers Harlequin shades that change with the light, crystal finishes and fades.
Satin and matte colours add a stricter rule. You can wash and protect them, but you can never polish them.
All three current models are hybrids, so detailing works around charging parts and high-voltage systems. The bodywork and cabins still bring different care needs.
Matte paint is washed by hand with a gentle shampoo that contains no wax or gloss enhancers. Those additives fill the fine texture of the finish and leave uneven, shiny patches.
For example, a quick wax at a general car wash can spoil the even look of a satin panel in minutes. Bird droppings and sand should come off promptly, since you cannot polish the marks away later.
Rinse first, then wash from the roof down with a soft mitt and light pressure. Pat the panels dry with a clean microfibre towel rather than rubbing in circles.
Matte film is worth considering on the nose and sills. It keeps the flat look and takes chips that the paint itself could never have polished out.
Carbon Skin is a Lamborghini interior material made from carbon fibre with a flexible matrix, used in place of leather or Alcantara on some surfaces. Lamborghini says it weighs 28% less than Alcantara and 65% less than leather.
It is cleaned gently with a soft brush and a mild interior cleaner, never a glossy dressing. Corsatex, a technical material the brand offers alongside fine leathers, needs the same light touch. In summer, hand oils and sunscreen build up on the wheel rim and seat bolsters first, so those spots need cleaning most often.
Perforated and ventilated Alcantara seats, fitted on some Urus versions, need minimal moisture so the holes stay clear. An interior detail treats each of these materials with its own product.
Carbon rims and aero parts need the same soft approach as the paint, because their clear finish scratches easily. Choose a gentle wheel product and soft bristles, and keep tyre dressing off the carbon.
Front splitters and vortex generators sit close to the road, so chips and scrapes build up fast. Clear film along their edges takes those hits before the carbon or paint does.
On moving parts such as the Revuelto’s spoiler, clean around the edges by hand. Dust packed into those gaps can scratch the surfaces as they slide. The charging flap on a Urus SE deserves similar care: keep the pressure lance well away and wipe its surround by hand. Cloudy or chipped carbon can be assessed through our carbon fiber service.
Low, wide bodywork and sharp edges pick up chips and scrapes, and special finishes are hard to repair without a trace. Many owners therefore ask about paint repair after a minor knock.
A Harlequin shade shifts colour as you walk around the car, so a blended panel can look wrong from one angle. Fades, where two colours melt into each other, are just as hard to copy.
Protecting the paint beforehand is usually simpler. Paint protection film comes in gloss and matte versions to suit both finishes. If you want a new colour without repainting, car wrapping covers that option and the rules around it.
Sand, heat and low ground clearance explain most Lamborghini wear in the UAE. Here are the usual troubles, each with the work that most often deals with it.
| Common issue in the UAE | What usually fixes it |
|---|---|
| Chips on the splitter and side intakes | Gloss or matte protection film on the leading edges |
| A scuff on a Harlequin or faded panel | Careful blending through car paint repair |
| Dull clear coat on carbon trim or rims | Refinishing via our carbon fibre service |
| Sand-dulled lower doors on a Urus | A ceramic coating after light correction on gloss paint |
| Worn Alcantara or Carbon Skin touch points | A careful interior clean |
| Kerbed forged wheels | Refinishing through rim repair |
Book film before the first long motorway trip if you can. A matte or Harlequin finish is far easier to keep than to restore.
No. Polishing flattens the texture that creates the matte look, leaving shiny patches that cannot be undone. Matte paint is washed and protected, never polished.
Yes, film is made with a matte top layer, so it protects the paint without adding gloss to the finish.
It can, but colour-shift and special finishes are very difficult to match. Our car paint page explains how colour matching and blending work.
Rinse the sand away before anything touches the paint, then wash the lower doors and arches gently. Dry grit wiped across satin paint leaves marks that cannot be polished out.
Often enough that dust never builds into a crust, which in summer usually means every week or two. Light dust lifts with less pressure, and that matters on a finish you cannot polish.